Setting Access Restrictions in the Admin Panel

On the "Site Settings" page, in the "Configs" section, within the "ADMIN SECURITY" block, you can configure IP access restrictions for the admin panel.

To configure, follow the instructions:

Please note that if you have a dynamic IP, it is recommended to set up a VPN profile with a static IP. Instruction: Setting up VPN (OpenVPN) / DONE

Only set up access restrictions to the admin panel if you have a static IP.

1. In the "Origin admin domain (CORS)" field, enter the admin panel domain without https://. Example: admin.exchanger.com

2. In the "Allow admin IPs" field, enter the allowed IPv4 and IPv6 addresses (separated by commas, without spaces). Example : 1.1.1.1,2.2.2.2,2001:0db8:85a3:0000:0000:8a2e:0370:7334

3. Click "Save".

4. Within 15 minutes, the settings will be applied, and the ability to log into the admin panel will only be available from the IPs specified in the "Allow admin IPs" field.

Ignoring Technical Work

In the "Ignore tech work for IPs" field, you can specify IP addresses that will be allowed to interact with the exchange block on the client side, even when technical work is enabled.

By default, when technical work is active on the site, the exchange block is unavailable.